具体成交价以合同协议为准
￥面议
恒天九五重工有限公司
免费会员·4年您现在的位置： 恒天九五重工有限公司>>旋挖钻机>> JVR400D旋挖钻机
产品介绍
主卷扬采用双马达、双减速、单层大卷筒配置，在保证提升力和速度前提下，钢丝绳的单层缠绕大大提高了钢丝绳使用寿命；导向滑轮架可完成两个自由度的动作，自动调整位置保证主卷钢丝绳通过，增强钢丝绳的使用寿命。
Main winch adopts duel motors, duel reducers, single roll big drum. Pilot pulley could guild the rope to the right position to make sure the ropes are rolling in single roll. All this could prolong the life of the rope while ensures the pulling force and pulling speed.
施工钻进采用卷扬加压，大加压力、起拔力达到44吨，加压行程大可达14米，可实现多种工法施工。
Winch press technique makes the crowd pull force reach 44T and its crowd stroke reach 14m. This design can meet many kinds of construction methods.
原CAT374D底盘和上车，履带中心距在2900-4500mm之间调整，将卡特配重后移，增加配重重量，提高整机的稳定性和可靠性。
Sourced CAT374D undercarriage and upper structure, the crawler could adjust between 2900mm and 4500mm. The readjusted counterweight improves the stability and reliability.
液压系统关键部分沿用卡特比勒液压系统主控回路、先导控制回路，使用了*的负载反馈技术，可使流量按需分配到系统各个工作装置，实现各种工况下的匹配。先导控制使操作更加灵活、安全、舒适、准确。系统独立散热。泵、马达、阀、油管及管接头采用进口产品，确保高可靠性。
Hydraulic system key parts are still using CAT main control returning and CAT pilot control returning system; it adopts loading reflex technique, this could configure the flow press to each device according to the demand, ensures the machine works perfect with the job. Pilot control makes the operation agility, safe, comfortable, precisely. The whole system adopted a individual coolant system. Pumps, motors, valves, hoses and joint are using the imported famous brand.
| 机型 Model | JVR400D |
| 大输出扭距 Max. output torque (KN.m) | 400 |
| 大钻孔深度 Max. drilling depth (m) | 109 |
| 大钻孔直径 Max. drilling diameter (mm) | 3000 |
| 发动机生产厂家 Engine brand | CAT |
| 发动机型号 Engine model | Cummins QSX15-C540 |
| 发动机功率 Engine power (KW) | 403 |
| 主泵流量 Main pump flow rate | 2×400 L/min@1800rpm |
| 底盘型号 Undercarriage model | CAT374F |
| 牵引力 Traction force (KN) | 896 |
| 钻孔转速 Drilling speed (rpm) | 6 - 22 |
| 大加压力/起拔力 Max. crowd push force (KN) | 380 / 380 |
| 加压系统行程 Stroke of sledge (mm) | 6200 |
| 主卷扬提升力（*层）Main winch pull (1st layer) | 350 |
| 主卷扬绳直径 Main winch wire rope dia. (mm) | Φ40 |
| 主卷扬提升速度 Max. main winch line speed (m/min) | 66 |
| 副卷扬提升力（*层）Aux. winch line pull (1st layer) (KN) | 120 |
| 副卷扬绳直径 Aux. winch wire rope dia. (mm) | Φ20 |
| 副卷扬提升速度 Aux. winch line speed (m/min) | 75 |
| 工作状态设备宽度/高度 Overall width in drilling position (mm) | 5300 / 27720 |
| 运输状态设备长度/宽度/高度 Overall L/H/W transport position (mm) | 18930 / 3700 / 3556 |
| 总重量（含钻杆）Total weight (t) | 132 |
相关产品
-
-
￥面议 -
￥面议 -
￥面议
