行业产品

  • 行业产品

上海欣誉电气设备有限公司


当前位置:上海欣誉电气设备有限公司>>机箱系列>>户外箱

户外箱

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质其他

所  在  地上海市

更新时间:2022-05-13 09:27:11浏览次数:149次

联系我时,请告知来自 智能制造网

经营模式:其他

商铺产品:27条

所在地区:上海上海市

联系人:魏经理

产品简介

户外箱名称:DH户外柜工艺特点介绍1、柜门离地25mm2、2.5mm厚的安装板

详细介绍

户外箱

名称:DH 户外柜
·工艺特点介绍
1、柜门离地25mm
2、2.5mm厚的安装板,两边有20mm宽的U形弯边,使得安装板强度更大,也便于搬运
3、箱体上和门上都有地线连接螺栓
4、承重铰链安装容易,换柜门也容易。柜门可开启130°
5、安装板利用塑料滑引器通过导轨,可柜体从正面将安装板推入柜内
6、坚固的长方形框架不但可以加强前门的强度,还可以用来固定安装电器元件(配合门安装横条使用)
7、背板能很容易地安装,用螺丝固定;还可换装箱门
8、防雨锁,上、中、下三点锁紧柜门
9、密封圈:聚氨脂发泡密封胶条,确保防护等级
10、槽型箱边与密封圈配合防止水和灰尘落入柜内
11、左右互换开门设计,方便使用
12、标准模数化安装孔设计,方便安装
13、内灯,方便安装和检测(自选件)
14、安装梁,不使用安装板同样可以进行柜内安装
15、底座,拆卸、安装都很方便(自选件)
16、根据需要,柜内可以加装15-20mm厚的闭泡橡胶隔热层(自选件)
17、防雨顶棚,防止雨水进入

·Install panel strip
1. Cabinet door is 25mm above the ground.
2. 2.5 mm thick installation plate, both sides with U curve 20 mm width, making installation plate more strengthful, for easy transportation.
3. There are ground bolt on the cabinet and cabinet door.
4. Bearing hinge, install easily, change cabinet door also easily. Cabinet door can open 130°.
5. Installation plate makes use of plastic slip inducer over guiding rail, can push installation plate inside the cabinet from front.
6. Rigid rectangular frame can not only strengthen the strength of front door, but can also be used to fix installed electric appliance component (with horizontal door installation strip).
7. Back plate can be installed easily, fixed with screw; cabinet door can also be changed.
8. Rain protection lock can lock cabinet from top, middle and bottom three points.
9. Seal ring: polyurethane sealing strip insures protection grade.
10. Slot cabinet side and sealing rings preventing water and dust from entering cabinet.
11. Left-right interchangeable opening design for easily usage.
12. Standardized modular installation hole design, convenient installation.
13. Internal light, convenient installation and inspection(selective)
14. Installation beam, can also perform inside installation without installation plate
15. Base, convenient disassembly and installation (selective).
16. According to requirement, cabinet internal can be added with 15-20 mm unicellular rubber insulation layer(selective).
17. Rain protection tent, keep off rain entrance.



 
·DH-1标准配置
1、安装板一块 (镀锌)
2、前单开门后背板
3、防雨顶棚一个
4、文件袋一个
5、灯开关一套
6、安装纵梁两根
7、简易包装
·DH-1 standard configuration
1. One installation plate(galvanized)
2. One front single opening back plate
3. One rain protection tent
4. 1 Document bag
5. One set of light and switch
6. Two installation stringers
7. Simple packing
 
柜体颜色
RAL7032(喷塑)(户外粉)
材料
冷轧钢板
门2.0mm
箱体1.5mm
安装板2.5mm
表面处理
磷化、喷塑
防护等级 IP66
Cabinet color
RAL7032 (plastic spraying)(outdoor powder)
Material
Cold rolled steel plate
Door 2.0 mm
Cabinet 1.5 mm
Installation plate 2.5 mm
Surface treatment
Phosphating, plastic spraying
Protection grade IP66


其他推荐产品更多>>

感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

智能制造网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.gkzhan.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,智能制造网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~