PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 无线通讯 机箱机柜
四川川大干燥科技工程有限责任公司
暂无信息 |
湿颗粒抛丸机Wet Granule Shot Blasting Machine
一、工作原理及应用范围介绍 Introduction of Working Principle and Scope of Application
本设备的目的是通过设置旋转离心盘、鼓风机、喷枪,将湿颗粒制成美丽的球丸。将前道工序做成的湿颗粒投入旋转离心盘内,启动鼓风机后再将旋转离心盘启动,使湿颗粒受到环隙空气浮力、旋转离心力、自身重力作用,呈环周绳股状运动,从而形成真球度的球丸。主要用于制药、食品等行业进行湿粒、软粒的球形化处理。
The equipment is mainly used for manufacture the wet granule into beautiful pellets through centrifugal pan, air blower and spray gun. The wet granules produced in the former processes will be put in the centrifugal pan, which will be started after the air blower is started. The wet granules will be moved in the ring strand shape under the actions of annular air buoyancy, rotating centrifugal force and gravity, thus to form the pellets with extremely high true sphericity. It is mainly applicable to spheroidization treatment of wet and soft granules in the pharmacy and food industries.
二、特点Characteristics
1.本机采用立式圆筒结构,结构巧妙地满足抛丸工艺要求。
2.设备内表,密闭状态下工作,符合GMP要求。
3.制丸时间短,高效节能。
4.丸剂、微丸等圆整度好,表面光滑,球粒内组分分布均匀。
5.较传统工艺时间缩短,成丸率高。
1. The vertical cylinder structure is adopted by the equipment to meet the requirements of shot blasting process.
2. The equipment is free of dead angle and operates in the closed state, complying with GMP requirements.
3. It is short in pelleting, efficient and energy-saving.
4. The pill and pellets have high rounding degree and smooth surface; and components in the particle are distributed uniformly.
5. Compared with the traditional process, it requires shorter time while has high yield rate.
三、技术参数(下表中数值仅供选型时参考)
Technical parameters (the values in the table below are for reference in type selection only)
四、结构简图Dimension sketch
湿颗粒抛丸机
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份