行业产品

  • 行业产品

青岛华至宝电气有限公司


当前位置:青岛华至宝电气有限公司>>出口仪器>>Three phase transformer winding deformation tester|Bluetooth winding deformation tester|HB-BRB3

Three phase transformer winding deformation tester|Bluetooth winding deformation tester|HB-BRB3

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质其他

所  在  地青岛市

更新时间:2023-08-05 07:44:58浏览次数:215次

联系我时,请告知来自 智能制造网

经营模式:其他

商铺产品:7条

所在地区:

产品简介

Threephasetransformerwindingdeformationtester|Bluetoothwindingdeformationtester|HB-BRB3产品简介Threephasetransformerwindingdeformationtester

详细介绍

Three phase transformer winding deformation tester|Bluetooth winding deformation tester|HB-BRB3


产品简介

Three phase transformer winding deformation tester, transformer winding deformation comprehensive testing device, Bluetooth winding deformation tester
Hua Bao brand HB-BRB3 transformer winding deformation comprehensive tester uses the principle of microcomputer control to test the USB connection between the host computer and the main control computer. It can be tested without hanging the cover or disassembling the transformer. At present, it uses the most popular double sweep method to measure. The analysis software is powerful, simple in wiring, convenient in use, accurate and reliable in testing. It is an electric power Recommended products.
HB-BRB3, : QQ:
1. Acquisition and control using high-speed, highly integrated microprocessor.
2. Communication USB interface used between a laptop and instrument.
3. Wireless WIFI interface (optional) used between the laptop computer and instrument. 
4. Hardware adopts dedicated DDS digital high-speed scanning technology (USA), which can accurately diagnose the faults like winding distorted, bulged, shift, tilt, inter-turn short-circuit deformation and inter-phase contact short-circuit.
5. High-speed dual-channel 16-bit A/D sampling (in field test, move tap changer, and the wave curve shows obvious change) .
6. Signal output amplitude is adjusted by software, and the peak value of amplitude is ± 10V.
7. The computer will automatically analyze the test results and generate electronic documents (Word)
8. The instrument has dual measurement features: linear frequency scanning measurement and segment frequency scanning measurement, compatible with measurement mode of two technical groups in China 
9. The amplitude-frequency characteristics are in line with the national technical specifications on amplitude-frequency characteristics tester. X-coordinate (frequency) has linear indexing and logarithmic indexing, so you can print out the curve with linear indexing and logarithmic indexing. The user can choose either according to actual needs.
10. Automatic test data analysis system,
Compare between A, B, C -phases in winding similarity comparison, and
the analysis results are:
① excellent consistency
② good consistency
③ poor consistency
④ rather poor consistency
Compare winding deformation by calling the original data and comparing it with the current data of the same phase, namely A-A, B-B, C-C, and the analysis results are:
① normal winding
② mild deformation
③ moderate deformation
④ severely deformation
11. Word electronic document can be automatically generated for saving and printing.
12. The instrument can fully meet the technical requirements of electricity standard DL/T911-2004 "Transformer winding deformation frequency response analysis".
13. Main technical parameters
①. Scan mode:
1. Linear scanning distribution
Scanning measurement range: (10Hz) - (10MHz) 40000 scanning point, resolution 0.25kHz, 0.5kHz and 1kHz
2. Segment frequency scanning measurement distribution 
Frequency scanning measurement range: (0.5kHz) - (1MHz), 2000 scanning points ;
(0.5kHz) - (10kHz)
(10kHz) - (100kHz)
(100kHz) - (500kHz)
(500kHz) - (1000kHz)
②. Other technical parameters:
1. Amplitude measurement range: (-120dB) to (+20 dB)
2. Amplitude measurement accuracy: 0.1dB
3. Scanning frequency accuracy: 0.01%
4. Signal input impedance: 1MΩ
5. Signal output impedance: 50Ω
6. Signal output amplitude: ± 20V
7. Test repetition percent: 99.9%
8. Measuring instruments dimensions (LxWxH) 300X340X120 (mm)
9. Instrument’s aluminum box size (LxWxH) 310X400X330 (mm)
10. Overall weight: 10Kg
Supply: transformer winding deformation comprehensive tester, transformer winding deformation comprehensive tester, transformer core deformation comprehensive tester, three-phase transformer winding deformation tester, transformer winding deformation comprehensive tester, Bluetooth winding deformation tester
For details, please visit: or or .
HB is the abbreviation of Huabao electric. Please identify Qingdao Huabao electric when purchasing
郑重声明:青岛华宝电气没有分公司或经销处,也没有啥亲戚干这行,那些相似或相近的单位或个人均与我公司无关,购买时请认准华宝(HB)品牌,直接与我公司联系,谨防,具体可186+5322+5978。

其他推荐产品更多>>

感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

智能制造网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.gkzhan.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,智能制造网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~