PLC 工控机 嵌入式系统 人机界面 工业以太网 现场总线 变频器 机器视觉 DCS PAC/PLMC SCADA 工业软件 ICS信息安全 应用方案 无线通讯
江苏星特莱新能源科技有限公司
江苏星特莱新能源科技有限公司
暂无信息 |
1
1.Security. Using the vertical blade and triangular double-fulcrum design, the main force points concentrated in the hub, so blade lose, broken and leaf flying-out and other issues have been a better solved.
安全性：叶片主要受力点集中于轮毂，因此叶片脱落、断裂和叶片飞出等问题得到了较好的解决；
2.Wind resistance. Horizontal rotation makes it only bears a small wind pressure, so that it can withstａnd 45 m/s super typhoon.
抗风能力：水平旋转使得它受风压力小，可以抵抗每秒45米的台风；
3.Rotation radius. Because of its design structure and special operating principle, it has a smaller radius of rotation than other types of wind turbines, it saves space, while improving efficiency.
回转半径：由于其设计结构和运转原理的不同，比其他形式风力发电具有更小的回转半径，节省了空间，同时提高了效率；
4.Power generation curve characteristics. Start wind speed is lower than other types of wind turbines, the power generation increasing rate is relatively gentle, so between 5~8 m/s range, it could produce 10% ~ 30% power than other types of wind turbines.
发电曲线特性：启动风速低于其他形式的风力发电机，发电功率的上升幅度较平缓，因此在5～8米风速范围内，它的发电量较其他类型的风力发电机高10%～30%；
5.Brake device. The blade itself has speed protection, and can configure manual mechanical and electronic brake meantime, in the absence of typhoon and super gust area, manual brake is enough.
刹车装置：叶片本身有转速保护，同时可配置机械手动和电子自动刹车两种，在无台风和阵风的地区，仅需设置手动刹车即可；
6.A3 steel housing material leads small volume & light weight. Beautiful appearance, low running vibration.
机壳选用A3钢，体积小，重量轻，外型美观，运行振动低。
7.Flange connection has high strength and easy installation and maintenance.
法兰安装，强度好，方便安装和维修。
8.Reinforce FRP blades, with optimized aerodynamic shape design and structural design, low start-up wind speed, higher wind energy utilization coefficient, and more annual power generation.
增强玻璃钢风轮叶片，配以优化的气动外形设计和结构设计，启动风速低，风能利用系数高，增加了年发电量。
9.The rudder adopts automatic yaw design, fold-tail type, it has stronger resistance to typhoon and is safe and reliable in operation.
尾舵采用自动偏航设计，折尾式，抗台风能力更强，运行安全可靠。
10.Patented NdFeB permanent magnet rotor alternator with special sub-design, effectively reduces the resistance torque of the generator, and at the same time makes better matching characteristics of the wind wheel and generator, and running reliability.
发电使用技术的钕铁硼永磁转子交流发电机，特殊的子设计，有效地降低发电机的阻转矩，同时使用风轮与发电机有更为良好的匹配特性，机组运行的可靠性。
11.optional maximum power tracking intelligent controller, could adjusts current effectively.
可选配功率跟踪智能型控制器，有效调节电流电
| 型号 Model | XTL-A2-100W | XTL-A2-200W | XTL-A2-300W | XTL-A2-400W |
| 额定功率 Rated power | 100W | 200W | 300W | 400W |
| 功率 Max power | 150W | 250W | 350W | 450W |
| 额定电压 Nominal voltage | 12V/24V | 12V/24V | 12V/24V | 24V |
| 启动风速(m/s) Start-up wind speed | 2.0m/s | 2.0m/s | 2.0m/s | 2.0m/s |
| 额定风速(m/s) Rated wind speed | 13m/s | 13m/s | 13m/s | 13m/s |
| 安全风速(m/s) Survival wind speed | 35m/s | 35m/s | 35m/s | 35m/s |
| 主机净重 Top net weight | 6.5kg | 7kg | 7.5kg | 8kg |
| 风轮直径 Wind wheel diameter | 1.1m | 1.15m | 1.2m | 1.3m |
| 叶片高度 Blade Height | 550MM | 600MM | 630MM | 650MM |
| 叶片数量 Number of blades | 3/5 | |||
| 叶片材料 Blades material | 尼龙纤维 Nylon fiber | |||
| 机身材料 Fuselage material | 压铸铝aluminum alloy | |||
| 发电机 Generator | 三相交流永磁同步发电机/磁悬浮发电机 Three phase ac permanent magnet generator/Maglev generators | |||
| 控制系统 Control System | 电磁刹车 electric eddy brake | |||
| 偏航方式 Yaw Mode | 自动迎风角度 The wind Angle automatically | |||
| 润滑方式 Lubrication mode | 自润滑 self-lubricating | |||
| 塔架形式 Tower form | 拉索/独立塔架 | |||
| 工作温度 Working temperature | -40℃-80℃ | |||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智能制造网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
