HIGH SPEED MICRO PROCESSOR DIGITAL PANEL MOUNT METER MODEL DPM-3

The DPM-3 digital panel meter is a low cost solution to a wide range of load/force and torque monitoring applications. By simple front panel push button setup the DPM-3 can be scaled to a full five digits from 0 to 99,999 to read directly in engineering units such as grams, ounces, pounds, inch pounds, etc. The DPM-3 samples 60 readings per second （50 for 50 Hz operation） for fast control response, true peak reading capability, and an analog output （optional） that

accuray tracks the signal input. The meter has an adaptive digital filter that can automatically select the best time constant for minimum noise yet respond rapidly to an actual change in signal level. The peak value can be displayed by a push of a button on the front panel. Auto tare allows the meter to be set to zero for any input signal

SPECIFICATIONS

level. The DPM-3 provides an isolated 5, 10, or 24 VDC output for bridge transducer/sensors.

FEATURES

•  Scalable to 5 digits Engineering units to +/-.99,999 Setup by front panel push buttons
•  Worldwide input power: 85 to 264 VAC and 90 to 370 VDC
•  Isolated 5, 10, or 24 VDC output Provides transmitter excitation
•  Peak hold and auto tare
•  Automatic, adaptive digital filtering
•  Plug-in screw terminals

PLUG-IN OPTIONS

• OPTION C

Dual setpoint controller 10 Amp, 240 VAC Form C relays

• OPTION H

Isolated linearized analog outputs 0 to 10 VDC or 0 to 20 （4/20） mA

• OPTION T

Isolated digital communications RS-232 for interface and meter setup RS-485 to interface with multiple meters Baud rates from 300 to 19,200

• OPTION V

Isolated low voltage power supply 9 to 37 VDC and 8 to 28 VAC inputs Isolated 5, 10, or 24 VDC output

New

Windows based software for data logging available upon request.