具体成交价以合同协议为准
￥面议
北京华智兴远科技有限公司
免费会员您现在的位置： 北京华智兴远科技有限公司>>电流传感器（磁通门）>> HCM－YSH系列高精度磁通门电流传感器
产品介绍
HCM-YSH系列磁通门电流传感器的初、次级之间是绝缘的，可用于测量直流、交流和脉冲电流，具有良好的精度和线性度，可达0.01%, 可用于超高精度的电流测量。
| 电气参数（Electrical characteristics） | |||||||
| 型号Type | HCM100-YSH | HCM200-YSH | HCM300-YSH |
| |||
| Ipn | 额定输入电流 Rated input | 100 | 200 | 300 | A | ||
| Ipm | 测量电流范围 Measuring range | 120 | 240 | 360 | A | ||
| Rm | 测量电阻 Measuring resistance | @±15V max 50(max) | @±15V max 50(max) | @±15V max 35(max) | Ω | ||
| KN | 匝比 Turns ratio | 1:1000 | 1：2000 | 1：2000 | |||
| Iout | 输出电流 Rated output current | 100 | 100 | 150 | mA | ||
| Rs | 次级线圈内阻 Secondary coil resistance | 8 | 15 | 28 | Ω | ||
| Io | 零电流失调 Zero offset current | ＜0.005 | mA | ||||
| Vc | 供电电源 Supply voltage | ±15±5% | V | ||||
| Ic | 静态功耗 Current consumption | ≤25+Iout | mA | ||||
| Iot | 零点温漂 Thermal drift of Io | -40～+85℃ | ±0.01 | mA | |||
| F | 带宽 Frequency bandwidth(-3dB) | DC～100 | KHz | ||||
| εG | 精度 Accuracy | ±0.01 | % |
| εL | 线性度 Linearity | ±0.005 | % |
| di/dt | 跟随精度Accurately followed | ＞100 | A/μS |
| Tr | 响应时间 Response time | ≤1 | μS |
| Vd | 绝缘电压 Insulation voltage | 5.0 | KV |
| Ta | 工作温度 Ambient operating temperature | -40～+80 | ℃ |
| Ts | 储存温度 Ambient storage temperature | -40～+85 | ℃ |
| M | 重量 mass | 180 | g |
| 标准Standards | EN50178/IEC61010-1/UL94-Vo/ROHS |
使用说明Remarks 1、 应用：新能源、航空、铁路、电网、汽车、不间断电源UPS、斩波器、医疗设备、整流、电源监测、电焊机、变频、开关电源、电池监测、电动机监测等领域。Application: New energy, aviation, railway, power grid, automobile, UPS, chopper, medical equipment, rectification, power monitoring, electric welding machine, frequency conversion, switching power supply, battery monitoring, motor monitoring and other fields. 2、 传感器的输出幅度可根据用户需要进行适当调节。The amplitude of the output of the sensor can be appropriately adjusted according to user needs. 3、可按用户需求定制不同额定输入电流和输出电压的传感器。Custom different rated input current and the output voltage of the sensor. 4、辅助电源接通后，绿灯常亮为正常工作；若接通辅助电源后绿灯不亮，应检查辅助电源是否正常。当原边电流过载时，绿灯也会熄灭，恢复正常测试范围后，绿灯会继续点亮。After the supply power is connected, the green light is always on for normal operation; If the green light does not light up after the supply power is connected, check whether the supply power is normal. When the primary current is overloaded, the green light will also go out. After returning to the normal test range, the green light will continue to light up.
下载详细资料
HCM300-YSH.pdf
相关产品
