您现在的位置:智能制造网>技术首页>产品规程

Vectociel方系列升降机使用说明(中英文)

2016年09月29日 17:14来源:南京维兑莎传动设备有限公司 >>进入该公司展台人气:1890

注 意 事 项

  • 开箱验收时,如发现附件、备件与装箱单不符,请及时与我公司。
  • 在设备安装试车前,应仔细阅读说明书,详细了解使用说明书各项条款,包括安全操作,调整说明等。
  • 对于与设备使用、操作无关的部分,一般不要轻易拆卸或随便调整,以免损坏设备,影响设备使用寿命。

 

  • 用途及特点  
  • 本升降机用于机构平台的升降, 夹紧机构的动力源,定位机构及蜗轮蜗

    杆传动机构。

  • 结构特点

该机为矩形结构,双向输入传动比大,传递扭矩大,工作平稳,安装方便定位准确,长期连续工作可采用循环油润滑。

  • 结构组成

本机由矩形箱体、蜗杆、蜗轮、T型丝杆或滚珠丝杆及各种组件组成。

 

二、技术规格

1.提升力                    CS××(××乘以1000牛)

2.提升率         快速1毫米/转、慢速0.25毫米/转

3.快速/慢速           4/1

      

三、 使用与保养:

    机器必须安装在具有强度的基面上,丝杆安装时的中心线必须垂直于基面,丝杆上涂以足够的润滑脂。断续工作时箱内加足够的润滑脂即可,连续工作在一小时以上时可用循环润滑油润滑,箱内温度在70°C左右属正常现象。建议输入转速在800转/分以下时发热更小、寿命会增长。

机器不允许无润滑的情况下运行,以免损坏机器。

经常检查箱内及丝杆的润滑脂。

 

Precautions

  • In case any spare parts do not match the packing list, please contact our company ASAP.
  • Before installation and test, user shall read the instruction carefully. User shall understand of the use of the specification, including the safe operation, such as adjustment instructions.
  • User shall not remove or adjust any parts of the products without confirmation from our technicians. Any adjustments to the products may affect the life expectancy of the equipment.

 

Product and Applications

1. The lift is used for the lifting of the platform mechanism, the fastening of power source of the clamping mechanism, and the positioning of the worm gear and worm drive mechanism.

2. Structure Features

The product is a rectangular structure, possessing great two-way input transmission ratio, as well as great transmission torque. The product works smoothly. In addition, the product has convenient installation method. It has accurate positioning. Long-term continuous work can be used for circulating oil lubrication.

3. Structure compositions

This product is made of rectangular box, worm, worm wheel, T type screw or ball screw and other spare parts.

 

 

Technical specifications

1.Lifting Power                 CS X X (X X Multiply by 1000 Newtons)

2.Lifting Ratio 1mm/turn at high speed, 0.25mm/turn at low speed

3.High Speed/ Low Speed                               4/1

 

Use and Maintenance Instructions

The product must be installed on a solid ground. At installation, the center line of wire rod must be perpendicular to the base surface, and grease shall be coated on the screw rod. At Intermittent work, sufficient amount of grease shall be added to the working box. At continuous work for more than one hour, circulating oil lubrication shall be added. Standard temperature inside the work box is 70°C. Recommended rotation speed is 800 revolutions per minute. At such speed, the lift expectancy will increase. The product is not allowed to operate without lubrication. In addition, check the grease box and wire rod at a frequent rate.

全年征稿/资讯合作 联系邮箱:1271141964@qq.com
  • 凡本网注明"来源:智能制造网"的所有作品,版权均属于智能制造网,转载请必须注明智能制造网,https://www.gkzhan.com。违反者本网将追究相关法律责任。
  • 企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
  • 本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。


编辑精选

更多


宣传样本推荐图书

旗下子站

工控网机器人仪器仪表物联网3D打印工业软件金属加工机械包装机械印刷机械农业机械食品加工设备制药设备仓储物流环保设备造纸机械工程机械纺织机械化工设备电子加工设备水泥设备海洋水利装备矿冶设备新能源设备服装机械印染机械制鞋机械玻璃机械陶瓷设备橡塑设备船舶设备电子元器件电气设备



关于我们|本站服务|会员服务|企业建站|旗下网站|友情链接| 兴旺通| 产品分类浏览|产品sitemap

智能制造网 - 工业4.0时代智能制造领域“互联网+”服务平台

Copyright gkzhan.comAll Rights Reserved法律顾问:浙江天册律师事务所 贾熙明律师

客服热线:0571-87756395加盟热线:0571-87759904媒体合作:0571-89719789

客服部:编辑部:展会合作:市场部:

关闭