为什么石材雕刻机在雕刻的时候要加水？

In the whole process of the stone carving machine, it is very easy to have problems, that is, the main shaft bearing. The dry burning of the main shaft bearing will cause the main shaft bearing to burn too much. Once it is too hot, it will burn the main shaft bearing. Once the main shaft bearing is burned, it should be repaired and repaired. Then the cycle time is usually about one to two weeks. One to two weeks of maintenance will undoubtedly delay the sales order.

总的来说，在实际操作设备开展生产加工工作中的情况下，一定要开展实际操作设备，确保设备的一切正常应用的基本上，提升生产率，增加设备的使用期。

Generally speaking, when the actual operation equipment is used for production and processing, the actual operation equipment must be carried out to ensure the normal application of the equipment, improve the productivity and increase the service life of the equipment.

石材雕刻机开展乱刻的一个层面，也将会是石材雕刻机主轴轴承超温造成的。假如错误主轴轴承开展通冷却水，那麽主轴轴承就会出现颤动或是移位，一会儿快，一会儿慢，而且一些不平稳。

One aspect of random engraving of stone engraving machine will also be caused by overheating of main shaft bearing of stone engraving machine. If the main shaft bearing is wrongly connected with cooling water, the main shaft bearing will vibrate or shift, which will be fast, slow and unstable.

以上就是3050雕刻机/为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is the 3050 engraving machine / Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to inquire!