您现在的位置:智能制造网>技术中心>石材雕刻机要不定时加水的原因是什么?

直播推荐

更多>

企业动态

更多>

推荐展会

更多>

石材雕刻机要不定时加水的原因是什么?

2023年07月21日 07:17:17人气:214来源:山东墨源数控设备有限公司

在加工金属、石材等硬质材料的时候,我们经常会看到数控雕刻机加工过程中会不定时的加水,这是为什么呢?今天小编就给大家分析一下。
When processing metal, stone and other hard materials, we often see that water will be added from time to time during the processing of NC engraving machine. Why? Today, Xiaobian will analyze it for you.
石材雕刻机在工作过程中需要连接电源,电源在机器上进行流通的时候,必然会产生热量。主轴在长时间通电工作的情况下,可能会温度过高,进而我们需要用水对其进行一定的冷却。
The stone carving machine needs to be connected to the power supply in the working process. When the power supply circulates on the machine, it will inevitably produce heat. When the spindle is powered on for a long time, the temperature may be too high, so we need to cool it with water.
在另一个方面就是,相对于石材雕刻机要雕刻的石材来说的,如果石材过硬的话,刀头在长期雕刻之后,同样会过热,所以刀头也需要水冷。
On the other hand, compared with the stone to be carved by the stone carving machine, if the stone is excellent, the cutter head will also overheat after long-term carving, so the cutter head also needs water cooling.
石材雕刻机和墓碑雕刻机都需要这也的双冷却,因为如果没有用水进行一定的冷却,让机器通电干烧,会对机器本身造成严重的损害。
Both stone carving machine and tombstone carving machine need this kind of double cooling, because if there is no water for certain cooling and the machine is powered on for dry burning, it will cause serious damage to the machine itself.
那么在石材雕刻机工作的过程中,容易出问题的就是主轴,主轴干烧会导致主轴发热过度,一旦发热过度就有可能将主轴烧掉。主轴一旦烧掉,就要把其返厂维修。那么这个周期一般是一到两个周左右。一到两个周的时间进行维修,肯定会延误客户订单。
In the process of stone carving machine working, the main shaft is prone to problems. Dry burning of the main shaft will lead to excessive heating of the main shaft. Once the heating is excessive, it is possible to burn the main shaft. Once the spindle is burned, it should be returned to the factory for maintenance. So this cycle is usually about one to two weeks. One to two weeks of repair will certainly delay the customer's order.
综上所述,在操作机器进行加工工作的时候,一定要合理的进行操作机器,保证机器的正常使用的基础上,提高生产效率,延长机器的使用寿命
To sum up, when operating the machine for processing, we must operate the machine reasonably to improve the production efficiency and prolong the service life of the machine on the basis of ensuring the normal use of the machine
石材雕刻机进行乱刻的一个方面,也可能是石材雕刻机主轴过热导致的。如果不对主轴进行通水冷却,那么主轴就会出现抖动或者错位,一会儿快,一会儿慢,并且有些不稳定。
One aspect of the random engraving of the stone engraving machine may also be caused by the overheating of the main shaft of the stone engraving machine. If the main shaft is not cooled by water, the main shaft will shake or dislocation, which will be fast and slow for a while, and some instability.
本文由石材雕刻机为您提供,我们的网站是:/我们将以全心全意的热情为您提供服务,欢迎您的访问
This article is provided by stone carving machine. Our website is: / We will provide you with services with wholehearted enthusiasm. Welcome to visit
全年征稿/资讯合作 联系邮箱:1271141964@qq.com

免责声明

  • 凡本网注明"来源:智能制造网"的所有作品,版权均属于智能制造网,转载请必须注明智能制造网,https://www.gkzhan.com。违反者本网将追究相关法律责任。
  • 企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
  • 本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。

<
更多 >

工控网机器人仪器仪表物联网3D打印工业软件金属加工机械包装机械印刷机械农业机械食品加工设备制药设备仓储物流环保设备造纸机械工程机械纺织机械化工设备电子加工设备水泥设备海洋水利装备矿冶设备新能源设备服装机械印染机械制鞋机械玻璃机械陶瓷设备橡塑设备船舶设备电子元器件电气设备


我要投稿
  • 投稿请发送邮件至:(邮件标题请备注“投稿”)1271141964.qq.com
  • 联系电话0571-89719789
工业4.0时代智能制造领域“互联网+”服务平台
智能制造网APP

功能丰富 实时交流

智能制造网小程序

订阅获取更多服务

微信公众号

关注我们

抖音

智能制造网

抖音号:gkzhan

打开抖音 搜索页扫一扫

视频号

智能制造网

公众号:智能制造网

打开微信扫码关注视频号

快手

智能制造网

快手ID:gkzhan2006

打开快手 扫一扫关注
意见反馈
关闭
企业未开通此功能
详询客服 : 0571-87858618