玉石雕刻机随着使用功率的增加,在发热散热问题中也存在一定的问题,常用的散热方法是水冷散热,这种散热方式的原理小编来为大家解答一下吧!
With the increase of power, the jade carving machine also has some problems in heating and heat dissipation. The common heat dissipation method is water cooling. The principle of this heat dissipation method is compiled to answer for you!
玉石雕刻机在工作的过程中,会产生热量,设备自身会发热,如果温度过高不进行处理的话对设备也会有很大的影响,而且用电也会加热,温度同样会升高。
In the process of working, the jade carving machine will generate heat, and the equipment itself will generate heat. If the temperature is too high, it will also have a great impact on the equipment, and the electricity will also be heated, and the temperature will also rise.
电机过热也会产生一些负效应,在散热方面可能有些人选择将机器停用一段时间,没那么热了再继续工作,这样其实也是一种办法,还可以在电机内部加热辐射,以保证及时散发出热量。
Overheating of the motor will also produce some negative effects. In terms of heat dissipation, some people may choose to stop the machine for a period of time and continue to work when it is not so hot. In fact, this is also a way. It can also heat radiation inside the motor to ensure timely heat emission.
玉石雕刻机散热的原理
Heat dissipation principle of jade carving machine
被动散热和风冷散热都是散热的方式,使用环境温度与设备的温差通过自然冷却,这样成本比较低,比较适合小型、短时间作业的玉石雕刻机设备。
Passive heat dissipation and air-cooled heat dissipation are both ways of heat dissipation. Using the temperature difference between the ambient temperature and the equipment through natural cooling, the cost is relatively low and is more suitable for small and short-time jade carving machine equipment.
目前使用空气冷却散热方式的比较多,可以使用风扇进行降温,但是又有点也会有缺点,缺点就是时间长了之后可能会堆积一些灰尘,需要进行清理。
At present, there are many ways to use air cooling and heat dissipation. Fans can be used for cooling, but there are some disadvantages. The disadvantage is that after a long time, some dust may accumulate and need to be cleaned.
使用水冷散热是在设备内部增加一个吸热的东西,通过水流来进行输送所产生的热量,从而达到冷却的目的,但是使用这种方式的成本相对较高一些。
The use of water cooling is to add a heat absorbing thing inside the equipment to transfer the heat generated through water flow, so as to achieve the purpose of cooling, but the cost of using this method is relatively high.
上一篇:木工雕刻机快速雕刻有诀窍
全年征稿/资讯合作
联系邮箱:1271141964@qq.com
免责声明
- 凡本网注明"来源:智能制造网"的所有作品,版权均属于智能制造网,转载请必须注明智能制造网,https://www.gkzhan.com。违反者本网将追究相关法律责任。
- 企业发布的公司新闻、技术文章、资料下载等内容,如涉及侵权、违规遭投诉的,一律由发布企业自行承担责任,本网有权删除内容并追溯责任。
- 本网转载并注明自其它来源的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品来源,并自负版权等法律责任。
- 如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。
2025第十一届中国国际机电产品交易会 暨先进制造业博览会
展会城市:合肥市展会时间:2025-09-20