数控开料机会受到什么样的因素影响？

CNC engraving machine itself will have a variety of data input modes, so it can operate easily. At present, there will be many different types, one is laser engraving, the other is mechanical engraving. These two different types will have power differentiation, but they will have a wide range of applications.

一般小功率数控雕刻机仅仅只适合一些小型标牌，建筑模型又或者是双色板。如果是雕刻玉石或者是雕刻金属，起码保证功率在1500W以上。大功率的雕刻机是可以选择做小功率雕刻机做的一些东西，比较合适的自然是大型的雕刻，大型的切割，还有大型的浮雕。

Generally, low-power CNC engraving machine is only suitable for some small signs, building models or two-color plates. If it is carved jade or carved metal, the power shall be at least 1500W. High power engraving machines are some things that can be done by low-power engraving machines. The more suitable ones are large-scale engraving, large-scale cutting and large-scale relief.

不过当前会拥有着各种不一样的类型，比如常见的就是步进系统。这主要就是混合的步进电机，在目前的市场上大概占据90%以上的份额，主要的原因是因为价格比较便宜，但是也会有一些缺陷，比如可能会有电机升温过高或者是工作容易丢步的现象。因此建议大家在挑选数控雕刻机的时候应该引起注意。

However, at present, there will be various types, such as stepping system. This is mainly the hybrid stepping motor, which accounts for more than 90% of the current market. The main reason is that the price is relatively cheap, but there will be some defects. For example, there may be the phenomenon that the motor temperature is too high or the work is easy to lose step. Therefore, it is suggested that attention should be paid to the selection of CNC engraving machine.

人们一般在选择一些数控开料机的时候，往往都会比较关注中间的内容，其实一款开料机有没有好的精度，这也是大家比较关注的，一般的情况下也会受到各种不同因素的影响。绝大部分都是因为导轨的问题，一定要去仔细的检查磨损的情况，如果磨损不平稳自然就会影响到精度。

People usually pay more attention to the content in the middle when choosing some CNC cutting machines. In fact, whether a cutting machine has good accuracy is also a matter of concern. Generally, it will also be affected by various factors. Most of them are due to the problem of guide rail. We must carefully check the wear. If the wear is not smooth, it will naturally affect the accuracy.

另外影响到加工精度的关键原因在于平整度，而这个原因大部分人都会忽视。这些刚刚购买的设备整体看上去比较平整，但是时间久了之后也容易会承受比较大的压力，因此就可能会导致裁切的效果受到影响，在这种情况下就只能够选择更换设备。

In addition, the key reason affecting the machining accuracy is flatness, which most people will ignore. The newly purchased equipment looks flat as a whole, but it is easy to bear great pressure after a long time, so it may affect the cutting effect. In this case, you can only choose to replace the equipment.

如果大家使用过数控开料机，自然就会了解，一般都是选择小钻开口，可是如果小锯口和大锯口没有在同一条直线上才接口，自然是不一样的。也可以看出切口并不是很平整，此时就需要调整位置。

If you have used the CNC cutting machine, you will naturally understａnd that the small drill opening is generally selected, but if the small saw mouth and the large saw mouth are not connected in the same straight line, it is naturally completely different. It can also be seen that the incision is not very flat, and the position needs to be adjusted at this time.

以上就是为大家介绍的有关玉石雕刻机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务/

The above is a detailed introduction to the jade carving machine. I hope it will help you If you have any questions, please contact us We will provide you with professional service /