石材雕刻机断刀的原因及处理方法

Stone carving machine has its particularity. One of the common problems in the carving process is the phenomenon of knife breaking. The main reason is that the stone is relatively hard after all. If the cooling water supply is not timely in the carving process, or the processing speed is too fast, the spindle speed is too slow, it will affect the cutting tools and materials.

方法/步骤

Method / step

1、如果刀具断掉之后，操作人员应该立即暂停机器，然后查看一下当下的加工行号并且详细的记录下来。仔细的检查一下断刀处看是否有断刀的刀体，如果有将其取出来。

1. If the tool is broken, the operator should immediately stop the machine, check the current processing line number and record it in detail. Carefully check the broken knife to see if there is a broken knife body. If so, take it out.

2、更重要的就是要分析一下断刀的主要原因，避免下次再犯。

2. More importantly, it is necessary to analyze the main reasons for the broken knife to avoid making it again next time.

3、然后就是更换刀具，换好刀具后应该注意的是定义原点，在石材雕刻机回到工件原点后X/Y两轴的位置是正确的，但是Z轴需要重新确定，这就主要是根据已做图形的样式来进行操作定义。

3. Then change the tool. After changing the tool, you should pay attention to defining the origin. After the stone engraving machine returns to the workpiece origin, the position of X / Y axis is correct, but the Z axis needs to be determined again, which is mainly defined according to the style of the graphics.

注意事项

matters needing attention

1、立即暂停机器，然后查看一下当下的加工行号并且详细的记录下来。

1. Immediately stop the machine, then check the current processing line number and record it in detail.

2、换好刀具后应该注意的是定义原点

2. After changing the tool, you should pay attention to defining the origin

以上就是为大家介绍的有关的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务/

The above is the detailed introduction of stone carving machine. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service /