智能制造网>产品库>物联网>传感器>温湿度传感器>>GSH-420 GSH-110 GRHO-420室内用湿度变送器

GSH-420 GSH-110 GRHO-420室内用湿度变送器

参考价	面议

参考价

面议

具体成交价以合同协议为准

公司名称中山市泰伦特电子科技有限公司
品牌
型号
所在地中山市
厂商性质经销商
更新时间2024/10/29 10:02:37
访问次数81

产品标签:

在线询价收藏产品点击查看电话

联系我们时请说明是智能制造网上看到的信息，谢谢!

索取相关资料

公司介绍主营产品

中山市泰伦特电子科技有限公司代理韩国工控工业自控元器件、仪器仪表、开关按钮、HANYOUNG(韩荣电子)  AUTONICS（奥托尼克斯） KOINO建兴  KACON(凯昆) YONGSUNG (韩国龙声) METRONIX DAEYANG(大洋)QLIGHT(可莱特-警报灯) HEDSS（海德）WOONYOUNG(云永)  DAEYANG(大洋电机) 、EOCR(三和) 、POWNIX(普力士) 、LG 、METRONIX(脉超尼斯)、PATLITE（派特莱）WERMA(伟马快德)EOCR(韩国三和电机保护器) TEND(天得电机) FOTEK(阳明工控) MOUJEN(中国台湾茂仁)  SUNX(日本神视)  SICK(德国施克)  韩国MENICS  韩国KONICS  美国HONEYWELL(霍尼韦尔)  LG低压电器  SAMYOUNG(韩国三荣)  SUNGHO(韩国成浩)  SUNKWAN(韩国鲜光)  FOX(DAESUNG韩国大成)  韩国FAS、  DongA(东亚机电)  Daeil大一  CHANTO(中国台湾长拓)  日本SMC气动  中国台湾HIWIN直线导轨  法国高诺斯(Crouzet)  日本和泉(IDEC)  德国P+F倍加福(PEPPERL+FUCHS)  中国台湾ANLY(安良机电)  中国台湾SAMD(山电电机)  HIBOX(韩国海博开关盒/接线盒)ELECSON（韩星）电压、电流、功率、频率数显表、计数器、计米器、时间继电器，转速表，线速度表、温控表、接近开关光电开关，旋转编码器、光纤开关、液位控制器、按钮开关、指示灯、光字牌开关、急停开关、选择开关、微动开关、行程开关、多层信号灯,警示灯,层灯，塔灯,旋转报警灯、蜂鸣器、保险丝座、接线端子、脚踏开关、天车开关、凸轮开关、十字组合开关、开关盒等、中间继电器固态继电器、功率调节器、脚踏控制器，脚踏调速器电子踏板黄玲
智能机电保护器D3-PRO系列温控范围 -10-50(℃)工作电流二次电流5安(A)工作电压 AC220V- +10%或110V- +10%(其它电压可向本公司咨询)(V)接线方式二次回路外形尺寸 WXHXD 180X110X75.7(mm)重量 1kg(包括D3-PRO及MCT)
中山市泰伦特电子科技有限公司是韩国三和（EOCR）株式会社在中国地区的代理公司，主要销售机电保护器:
•  EOCR-4F智能过电流继电器
•  EOCR-SP1/SP2智能过电流继电器
•  EGR接地保护继电器
•  EOCR-3MS/FMS智能过电流继电器
•  EOCR-FD智能过电流继电器
•  EOCR-3DS智能过电流继电器
•  零序电流互感器ZCT
•  EVR-FD电压继电器
•  EVR电压继电器
•  EUCR-3C欠电流继电器
•  EOCR-DS(T)固态过电流继电器
•  EOCR-1P固态过电流继电器
•  EOCR-SE2固态过电流继电器
•  EOCR-AR固态过电流继电器
•  EOCR-DS1/DS2/DS3智能过电流继电器
•  EOCR-SS1/SS2智能过电流继电器
•  EOCR-3MZ/FMZ智能过电流继电器
•  EOCR-3DM/FDM智能过电流继电器
•  EOCR-3DZ智能过电流继电器
•  EOCR-3DD智能过电流继电器
•  电流互感器CT
•  EVR-PD电压继电器
•  EUCR欠电流继电器
•  EOCR-4E固态过电流继电器
•  EOCR-SP固态过电流继电器
•  EOCR-ST固态过电流继电器
•  EOCR-SE固态过电流继电器
•  EOCR-SS固态过电流继电器

展开显示更多内容

• EOCR-4E固态过电流继电器 • EOCR-SP固态过电流继电器• EOCR-ST固态过电流继电器• EOCR-SE固态过电流继电器
• EOCR-SS固态过电流继电器

产品简介在线询价

GSH-420 GSH-110 GRHO-420室内用湿度变送器

GSH-420 GSH-110 GRHO-420室内用湿度变送器产品信息

ROOM HUMIDITY TRANSMITTER(GSH-420)

"GSH" Room Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the Relative Room Humidity (RH) and converts the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 4-20mA DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE	: 24V AC / DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99%Rh

ACCURACY	: 20°C at 20~90%Rh within ± 3%Rh

OUTPUT SIGNAL	: 4 ~ 20mA DC

SENSING TIME	: Apprx. 20 sec


AMBIENT TEMPERATURE	: 1) On Operation : 0 ~ +50℃ 2) On Transportation & Storage : -25°C ~+65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%RH 2) On Transportation & Storage : below 95%RH

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

The element must not be touched and should be protected dust, water, spray and condensation.
The sensor element must not be exposed to organic solvents, sylphid bearing materials.
Do not use a DC test meter as this will damage the sensor element.
Select a location approx 1.5M above the floor.
The sensor location should also be reasonably clean and free from damp and condensation.
Fix with the bolts provided in pull box(50 × 100, 100 × 100)
To avoid the conductive current the wires should be separated from power lines.
Use the shield line when wiring

ROOM HUMIDITY TRANSMITTER(GSH-110)

"GSH" Room Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the Relative Room Humidity (RH) and converts the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 0-10VDC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 0-10V DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99%Rh

ACCURACY	: 20°C at 20~90%Rh within ± 3%Rh

OUTPUT SIGNAL	: 0-10V DC (0 - 1V DC)

SENSING TIME	: Apprx. 20 sec


AMBIENT TEMPERATURE	: 1) On Operation : 0 ~ +50℃ 2) On Transportation & Storage : -25°C ~+65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%RH 2) On Transportation & Storage : below 95%RH

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

ROOM HUMIDITY TRANSMITTER(GRHO-420)

“GRHO“ Room Humidity Transmitter is intended for installing at the place of Heating, Ventilation facilities and specially at the place needed to be pleasantness of inside of building, and used to control and sense inside humidity possible to be used by connecting with Central control system.

SUPPLY VOLTAGE	: 15 ~ 30 V DC

OUTPUT SIGNAL	: 4 ~ 20 mA
SENSING RANGE	: 0 ~ 99%RH

SENSING ELEMENT	: Integrated Circuity

ACCURACY	: 20°C at 20~90%Rh within ± 3%Rh

WIRING	: 2 Wire

SENSING TIME	: Apprx1 min( Flexible depend on convection air and wall condition )

AMBIENT TEMPERATURE	: 1) On Operation : 0 ~ +70℃ 2) On Transportation & Storage : -15°C ~+50°C


AMBIENT HUMIDITY	: 1) On Operation : below 99%RH 2) On Transportation & Storage : below 95%RH

PROTECTION CLASS	: IP 30(EN60529)

WEIGHT	: 0.08Kg

Installing Location : Install at inside wall of good ventilating space
Prohibited Location : Inside corner, shelves, behind curtain and nearby reverse side of heat source
- Keep away from direct light and the end of wire tube of Sensor should be shielded to protect
any errors caused from ventilating air coming through wire tube.
Calibration : As adjusted on delivery from factory, do not change voluntarily