智能制造网>产品库>物联网>传感器>温湿度传感器>>GDH-420 GDH-110 GDHO-420胆管湿度变送器

GDH-420 GDH-110 GDHO-420胆管湿度变送器

参考价	面议

参考价

面议

具体成交价以合同协议为准

公司名称中山市泰伦特电子科技有限公司
品牌
型号
所在地中山市
厂商性质经销商
更新时间2024/10/29 10:03:54
访问次数76

产品标签:

在线询价收藏产品点击查看电话

联系我们时请说明是智能制造网上看到的信息，谢谢!

索取相关资料

公司介绍主营产品

中山市泰伦特电子科技有限公司代理韩国工控工业自控元器件、仪器仪表、开关按钮、HANYOUNG(韩荣电子)  AUTONICS（奥托尼克斯） KOINO建兴  KACON(凯昆) YONGSUNG (韩国龙声) METRONIX DAEYANG(大洋)QLIGHT(可莱特-警报灯) HEDSS（海德）WOONYOUNG(云永)  DAEYANG(大洋电机) 、EOCR(三和) 、POWNIX(普力士) 、LG 、METRONIX(脉超尼斯)、PATLITE（派特莱）WERMA(伟马快德)EOCR(韩国三和电机保护器) TEND(天得电机) FOTEK(阳明工控) MOUJEN(中国台湾茂仁)  SUNX(日本神视)  SICK(德国施克)  韩国MENICS  韩国KONICS  美国HONEYWELL(霍尼韦尔)  LG低压电器  SAMYOUNG(韩国三荣)  SUNGHO(韩国成浩)  SUNKWAN(韩国鲜光)  FOX(DAESUNG韩国大成)  韩国FAS、  DongA(东亚机电)  Daeil大一  CHANTO(中国台湾长拓)  日本SMC气动  中国台湾HIWIN直线导轨  法国高诺斯(Crouzet)  日本和泉(IDEC)  德国P+F倍加福(PEPPERL+FUCHS)  中国台湾ANLY(安良机电)  中国台湾SAMD(山电电机)  HIBOX(韩国海博开关盒/接线盒)ELECSON（韩星）电压、电流、功率、频率数显表、计数器、计米器、时间继电器，转速表，线速度表、温控表、接近开关光电开关，旋转编码器、光纤开关、液位控制器、按钮开关、指示灯、光字牌开关、急停开关、选择开关、微动开关、行程开关、多层信号灯,警示灯,层灯，塔灯,旋转报警灯、蜂鸣器、保险丝座、接线端子、脚踏开关、天车开关、凸轮开关、十字组合开关、开关盒等、中间继电器固态继电器、功率调节器、脚踏控制器，脚踏调速器电子踏板黄玲
智能机电保护器D3-PRO系列温控范围 -10-50(℃)工作电流二次电流5安(A)工作电压 AC220V- +10%或110V- +10%(其它电压可向本公司咨询)(V)接线方式二次回路外形尺寸 WXHXD 180X110X75.7(mm)重量 1kg(包括D3-PRO及MCT)
中山市泰伦特电子科技有限公司是韩国三和（EOCR）株式会社在中国地区的代理公司，主要销售机电保护器:
•  EOCR-4F智能过电流继电器
•  EOCR-SP1/SP2智能过电流继电器
•  EGR接地保护继电器
•  EOCR-3MS/FMS智能过电流继电器
•  EOCR-FD智能过电流继电器
•  EOCR-3DS智能过电流继电器
•  零序电流互感器ZCT
•  EVR-FD电压继电器
•  EVR电压继电器
•  EUCR-3C欠电流继电器
•  EOCR-DS(T)固态过电流继电器
•  EOCR-1P固态过电流继电器
•  EOCR-SE2固态过电流继电器
•  EOCR-AR固态过电流继电器
•  EOCR-DS1/DS2/DS3智能过电流继电器
•  EOCR-SS1/SS2智能过电流继电器
•  EOCR-3MZ/FMZ智能过电流继电器
•  EOCR-3DM/FDM智能过电流继电器
•  EOCR-3DZ智能过电流继电器
•  EOCR-3DD智能过电流继电器
•  电流互感器CT
•  EVR-PD电压继电器
•  EUCR欠电流继电器
•  EOCR-4E固态过电流继电器
•  EOCR-SP固态过电流继电器
•  EOCR-ST固态过电流继电器
•  EOCR-SE固态过电流继电器
•  EOCR-SS固态过电流继电器

展开显示更多内容

• EOCR-4E固态过电流继电器 • EOCR-SP固态过电流继电器• EOCR-ST固态过电流继电器• EOCR-SE固态过电流继电器
• EOCR-SS固态过电流继电器

产品简介在线询价

GDH-420 GDH-110 GDHO-420胆管湿度变送器

GDH-420 GDH-110 GDHO-420胆管湿度变送器产品信息

DUCT HUMIDITY TRANSMITTER(GDH-420)

"GDH" Duct Humidity Transmitter is intended for an electronic Humidity transmitter to measures the Duct Relative Humidity (RH) and converts the measurement into and electric signal.

This unit can be used with all system equipments that can receive output signals 4 ~ 20mA DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which varies electrical capacity depending on circumstantial relative humidity.
Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 99% relative humidity ).
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
POWER CONSUMPTION	: below 0.5VA
SENSING RANGE	: 0 ~ 99% Rh
SENSING ELEMENT	: Integrated Circuity


ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 4 ~ 20mA DC

SENSING TIME	: Apprx. 20 sec. (velocity 20m/s)


AMBIENT TEMPERATURE	: 1) On Operation : -5 ~ +50℃ 2) On Transportation & Storage : -25 ~ +70°C

AMBIENT HUMIDITY	: 1) On Operation : 5 ~ 99%Rh 2) On Transportation : below 95% Rh


WEIGHT	: 0.17Kg (W/BRACKET)

CABLE FITTING	: PF 1/2"
PROTECTION CLASS	: IP 54

Installation Location; When the detector has to be mounted on supply duct, the detector must be kept
between 3 to 8 meters from the humidifier unit
For accurate measurement of the relative humidity, Follow recommendation as ;
-Steam humidifier; between 5 to 8 meters
-Spray water fogger; between 3 to 10 meters

DUCT HUMIDITY TRANSMITTER(GDH-110)

"GDH" Duct Humidity Transmitter is intended for an electronic Humidity transmitter to measures the Duct Relative Humidity (RH) and converts the measurement into and electric signal.

This unit can be used with all system equipments that can receive output signals 0 ~ 10VDC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which varies electrical capacity depending on circumstantial relative humidity.
Electronic sensing circuit varies signal into 0 ~ 10VDC ( within 0 ~ 99% relative humidity ).
Sensing Accuracy is ±3% within usable range of 20 ~ 90% RH.

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
POWER CONSUMPTION	: below 0.5VA
SENSING RANGE	: 0 ~ 99% Rh
SENSING ELEMENT	: Integrated Circuity


ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 0 ~ 10V DC (0 ~ 1V DC)

SENSING TIME	: Apprx. 20 sec(velocity 20m/s)


AMBIENT TEMPERATURE	: 1) On Operation : -5 ~ +50℃ 2) On Transportation & Storage : -25 ~ +70°C

AMBIENT HUMIDITY	: 1) On Operation : 5 ~ 99%Rh 2) On Transportation : below 95% Rh


WEIGHT	: 0.17Kg (W/BRACKET)

CABLE FITTING	: PF 1/2"
PROTECTION CLASS	: IP 54

DUCT HUMIDITY TRANSMITTER(GDHO-420)

"GDHO “ Duct Humidity Transmitter is intended for Ventilation and Air-handling units to the following usages ;
Sensing supplying or ventilating Air humidity
Shift Sensor ( in case of revising room humidity depend on outside air humidity )
Measuring Sensor ( display sensing value or in case of using DDC auto control system )

SUPPLY VOLTAGE	: 15 ~ 30 V DC

OUTPUT SIGNAL	: 4 ~ 20 mA
SENSING RANGE	: 0 ~ 99%RH

SENSING ELEMENT	: Integrated Circuity

ACCURACY	: 20°C at 20~90%Rh within ± 3%Rh

WIRING	: 2 Wire

SENSING TIME	: Apprx.1 min. at 2m/s velocity

AMBIENT TEMPERATURE	: -5 ~ +70°C


AMBIENT HUMIDITY	: 1) On Operation : below 5 ~ 99%RH 2) On Transportation : below 95%RH
CABLE FITTING	: PF1/2"

PROTECTION CLASS	: IIP54 (EN60529)

WEIGHT	: 0.25Kg ( including bracket )

In case of controlling supplying air humidity
- In case of installing Fan at the last air control unit, install behind of Fan
- For the other cases, install at least 1.5M away from the last air control unit
In case of controlling ventilating air humidity
- Install always at behind of Fan