亲，参阅英文资料

Sponge foam cutting machine - Laboratory

Sponge foam cutting machine model: GCPQ-100

One, the main scope and function

Sponge foam cutting machine this machine is used for cutting the foam material, it can be hard foam, soft foam, plastic cut into square, rectangular, strip, with high cutting efficiency, cutting size is accurate, the advantage of high precision.

======================================================================

Two, sponge foam cutting machine main technical requirements:

The 1, cutting the display resolution: 0.01mm

2, the cutting precision: ± 1mm

3, table size: 1000 x 700mm (according to user required)

4, can be effective stroke moving table 500mm

5,the minimum cut size: 25 x 25 x 10mm

6, the maximum thickness: 250mm

7, the power supply voltage: 220V

8, power: 2.2KW

========================================================

Three, sponge foam cutting machine structure features:

1, this machine is equipped with a removable blanking device is size. In order to ensure the dimension precision blanking, equipped with digital display.

2, movable worktable, adopts the negative pressure adsorption method, fixed by cutting foam.

3, stop, equipped with manual and automatic device.

4, the red brake button to manually brake. When the start button press this button is invalid

5, when the brake electromagnet suction fit, press the start button, brake electromagnet released immediay.

========================================================================

The four major configuration, sponge foam cutting machine equipment

1, test host

2, a set of control system

3, a set of adsorption device

4, digital display scale one

5, a drive motor

6, a cutting knife (do)

7, grinding wheel piece a piece

8, dust collection device

海绵泡沫切割机-实验室型

海绵泡沫切割机型号：GCPQ-100

一、主要适用范围及功能

海绵泡沫切割机本机主要用于泡沫材料的切割，其可将硬质泡沫、软质泡沫、塑料切割成方形、长方形、条形等，具有切割效率高，切割尺寸准确，精确度高等优点。

==========================================================

二、海绵泡沫切割机主要技术要求：

1、切割显示分辨率：0.01mm

2、切割尺寸精度：±1mm

3、工作台尺寸：1000×700mm（可根据用户需要而定）

4、可移动工作台有效行程为 500mm

5、zui小切割尺寸：25×25×10mm

6、zui大试样厚度：250mm

7、电源电压:220V

8、功率： 2.2KW

================================================================

三、海绵泡沫切割机结构特点：

1、该机配有可移动切料调正尺寸装置。为保证切料尺寸精度，配有数字显示尺。

2、可移动工作台，采用负压吸附方式，固定被切割泡沫。

3、停止运转时，配有手动、自动装置。

4、红色刹车按钮用于手动刹车。当启动按钮按下时此按钮无效

5、当刹车电磁铁吸合时，按下启动按钮，刹车电磁铁立即释放。

=======================================================================

四、海绵泡沫切割机设备主要配置

1、试验主机一台

2、控制系统一套

3、吸附装置一套

4、数显标尺一个

5、驱动电机一个

6、切割刀一片（增配一片）

7、磨刀砂轮片一片

8、吸尘装置一套

===================================================

亲：

1.可免费为客户检测试样；

2.可以根据不同客户的需求开发标准和非标准产品。

3.售前，我们专门派技术人员为您设计*的流程和方案；

4.售后，将免费指派技术人员为您调试安装；

5.保修一年，产品终身维护；