DY501型电热熔融设备

DY501型电热熔融设备技术参数：

加热单元：3根双螺旋单端硅碳棒； 
大温度：1250℃，连续可调； 
测温单元：2根铂铑热电偶，测温1600℃； 
容量：同时熔融4个样品（可根据用户要求增加到6个）； 
功率：6kw; 
电源：380-415V,50-60Hz，三相; 
尺寸（高×宽×深）：500mm×1217mm×500mm; 
重量：115kg. 
Heating unit: 3 pieces of double helix ,single-end, silicon carbide rod 
Maximum Temperature: 1250℃,continuously adjustable 
Temperature measurement unit: 2 pieces of platinum-rhodium thermocouple, with maximum measurable temperature 1600℃ 
Capacity: 4 samples simultaneously (maximum 6 samples if required by user) 
Wattage: 6kw 
Power supply: 380-415V,50-60Hz，three phase 
Dimension(Height ×Width × Depth): 500mm×1217mm×500mm 
Weight: 115kg

DY501型电热熔融设备 主要特点：

◆采用CPU微机及PID控制技术，大屏幕中文显示,菜单式操作； 
◆双螺旋硅碳棒加热，铂铑热电偶测温； 
◆多可同时熔融4个样品（可根据用户要求增加到6个）； 
◆可预先自由设定多达10个加热制样程序，其加热过程，升温速度，终温度，坩埚架摇摆时间、幅度、速度，冷却时间，是否用风扇，风量大小等均可预先设定； 
◆除熔融样注入成型模具采用手动外，其他均自动控制，保证了样品的*性和均匀性，真正做到不同样品仅是其成分不同而没有其他不同； 
◆坩埚及成型模具的支架采用耐高温合金钢制成,保证在高温状态下无任何化学反应； 
◆熔样室盖打开装置采用链轮杠杆结构，操作轻松自如； 
◆具有低启动温度报警，打开熔样室断电保护； 
◆具有过流、过温断电保护并报警，并且过温断电保护采用与加热制样独立的热电偶测温，与加热控制电路一起组成三重保护，使过温断电保护更可靠。 
Applies CPU microprocessor and PID control technique, large screen Chinese display, and menu operation 
Heating with double helix silicon carbide rod; temperature measured with platinum-rhodium thermocouple 
Up to 4 samples can be fused simultaneously (maximum 6 samples if required by user) 
Up to 10 customized heating programs can be preset; within the programs, the heating process, the temperature increase speed, the final temperature, the shaking time, shaking amplitude, and shaking speed of the crucible stool, the cooling time, whether to use fans, the air flow, and so on, all can be preset. 
Automatic control in all the process except for the filling of the fusion sample, enabling the sameness and homogeneity of the sample; all samples are uniformly the same except for the differences in composition 
The bracket of the crucible and the mould are made of high temperature alloy, which guarantees no chemical reaction in high temperature 
Chain wheel lever structure is used in the opening device of the cover of the fusion room, trouble-free for user operation 
With minimum start temperature alarm and power switch-off protection when the cover of the fusion room is open 
Automatically switching off power and setting alarm for overcurrent and overheat; independent temperature measurement thermocouples are used for overheat protection and heating control; together with the heating control circuit, they can form treble protection of the system and can make the power switch-off protection for overheat more reliable.