SL201型半自动压样机

SL201型半自动压样机技术参数：

额定压力：400kN（SL201A为600kN） 
保压时间：1—999s 
工作台面积：φ82mm 
工作台上下开距：0—120mm 
大工作行程：50mm 
柱开距：210mm 
长宽高：570mm×420mm×1120mm 
净重：185kg 
功率：1.1kw 
电源：AC380V, 50/60Hz, 3相 

Rating pressure：400kN（600kN for SL201A） 
Pressure-holding-time：1—999s 
Worktable：φ82mm 
Worktable opening span ：0—120mm 
Max. Travel：50mm 
Pole Opening Span：210mm 
L/W/H：570mm×420mm×1100mm（570mm×420mm×1120mm for SL201A） 
Net weight：185kg（190kg for SL201A） 
Power：1.1kw 
Power Supply：AC380V, 50/60Hz, 3phase

SL201型半自动压样机主要特点：

1． 采用德国新技术，油路采用集成系统。*液压系统大的缺陷就是泄漏，而油路的集成侧减少了泄漏机会，从而提高了可靠性； 
2． 同时集成系统还减少了系统的空间，使其体积小重量轻，相比国内同类产品其体积仅为三分之二，重量仅为二分之一。 
3．其仪表能十分清晰地显示液压系统的工作压力和机器的压力，它操作简单方便，且应急性好，可随时切断自动运行返回到起始状态。 
4．采用动态保压，相比国内同类产品的静态保压，它真正做到了在保压时维持压力不变。 
SL201 semi-auto presser is based on the latest German technology on integrated oil system. It is well-known that oil leakage is the biggest problem of hydraulic system. The integrated system reduces leakage, therefore increases system reliability. 
Meanwhile, the integrated system also reduces system volume, resulting lighter weight. It is only two thirds of domestic product of the same kind in terms of volume, and only half of the weight of the said domestic product. 
SL201 presser has a very easy operation instrumentation panel. The panel can display the machine pressure and system working pressure in a clear way. SL201 also has very fast response time. It can be shut down the automatic running mode and go back to initial states at any time. 
Sl201 adopts dynamic pressure protection. Compared with domestic products, which only use static pressure protection, SL201 achieved constant pressure during pressure protection.