具体成交价以合同协议为准
￥面议
深圳市卓杰电子有限公司
免费会员·3年您现在的位置： 深圳市卓杰电子有限公司>>光纤收发器芯片>> IP113C:10/100BASE-TX to 100BASE-FX converter
产品介绍
general desc-ription:
ip113c can be a 10/100base-tx to 100base-fx converter or a 100base-fx to 100base-fx repeater. it consists of a 2-port switch controller, a fast ethernet transceiver and a phy for 100base-fx. the transceivers in ip113c are designed in dsp approach with advance 0.25-um technology; this results in high noise immunity and robust performance.
ip113c not only supports store and forward mode, ip113c also supports modified cut through mode and pure converter mode for low latency data forwarding. ip113c can transmit packet(s) up to 1600 bytes to meet requirement of extra long packets.
ip113c supports ieee802.3x, collision base backpressure, and various led functions, etc. these functions can be configured to fit the different requirements by feeding operation parameters via eeprom interface or pull up/down resistors on specified pins
features:
- a 10/100base-tx/ 100base-fx converter
- built in a 10/100base-tx transceiver
- built in a phy for 100base-fx
- built in a 2-port switch
– pass all packets without address and crc check (optional)
– supports modified cut-through frame forwarding for low latency
– supports pure converter mode data forwarding for extreme low latency
– supports flow control for full and half duplex operation
– bandwidth control
– forward 1600 bytes packet for management
– optional forward fragments
- built in 128kb ram for data buffer
- supports auto mdi-mdix function
- supports link fault pass through function
- supports far end fault function
- led display for link/activity, full/half, 10/100
- built in a watchdog timer to monitor internal switch error
- supports eeprom configuration
- 0.25-um cmos technology
- single 2.5v power supply
- 48-pin lqfp package
ip113c can be a 10/100base-tx to 100base-fx converter or a 100base-fx to 100base-fx repeater. it consists of a 2-port switch controller, a fast ethernet transceiver and a phy for 100base-fx. the transceivers in ip113c are designed in dsp approach with advance 0.25-um technology; this results in high noise immunity and robust performance.
ip113c not only supports store and forward mode, ip113c also supports modified cut through mode and pure converter mode for low latency data forwarding. ip113c can transmit packet(s) up to 1600 bytes to meet requirement of extra long packets.
ip113c supports ieee802.3x, collision base backpressure, and various led functions, etc. these functions can be configured to fit the different requirements by feeding operation parameters via eeprom interface or pull up/down resistors on specified pins
features:
- a 10/100base-tx/ 100base-fx converter
- built in a 10/100base-tx transceiver
- built in a phy for 100base-fx
- built in a 2-port switch
– pass all packets without address and crc check (optional)
– supports modified cut-through frame forwarding for low latency
– supports pure converter mode data forwarding for extreme low latency
– supports flow control for full and half duplex operation
– bandwidth control
– forward 1600 bytes packet for management
– optional forward fragments
- built in 128kb ram for data buffer
- supports auto mdi-mdix function
- supports link fault pass through function
- supports far end fault function
- led display for link/activity, full/half, 10/100
- built in a watchdog timer to monitor internal switch error
- supports eeprom configuration
- 0.25-um cmos technology
- single 2.5v power supply
- 48-pin lqfp package
