具体成交价以合同协议为准
￥面议
深圳市卓杰电子有限公司
免费会员·3年您现在的位置： 深圳市卓杰电子有限公司>>光纤收发器芯片>> IP113S A10/100Base-TX / 100Base-FX Converter
产品介绍
general desc-ription :
ip113s built in a 3-port switch controller, an oam engine, a fast ethernet transceiver, a phy for 100base-fx and three mii i/f. two of these mii can be configured as smii or rs232 i/f. the powerful switch engine supports flow contol, vlan, qos, port mirroring, and trunking, etc.
ip113s can be a 10/100base-tx to 100base-fx converter with an mii to connect to an external phy for back up fiber application or an external mac for web management application. ip113s forwards packets with length up to 2046 bytes in store and forward mode and modified cut through mode and it can support jumbo frame (up to 9k bytes) in pure converter mode and pass through mode to meet requirement of extra long packets.
ip113s supports remote access function and loop back test function defined in ts-1000 standard version 2 (＊). local ip113s can access the registers of remote ip113s by programming local ip113s’s registers via smi connection. ip113s implements the management function using the maintenance frame defined in ts-1000 spec.
ip113s supports smii to connect to a switch controller to build up a multiple-port fiber switch, which supports ts-1000. ip113s is a two-port 100base-fx phy with ts-1000 function in this application.
ip113s can be used as a six-pin rs232 extender, rts, cts, dtr, dsr, dc and si, when it works as a rs232 to ethernet converter. the limitation in distance of rs232 is extended to the distance of ethernet 100base-tx or 100base-fx.
＊ the ecommunication technology committee owns the copyright of ts-1000.
feature :
built in a 3-port switch
- non-blocking architecture
- pass all packets with/without crc check (optional)
- pass pause frame (optional)
- bandwidth control (32k or 512kbps x n)
- forward 2046 bytes (max.) packets in switch mode
- forward 9k jumbo packets in pass through mode
- port mirroring
- link aggregation (support recovery)
- support rs232-like interface to tp/fiber extension mode
built in 2-port fast ethernet phy
- a 10/100base-tx/100base-fx phy
- a 100base-fx phy
supports ts-1000
supports two wires serial cpu interface for management
supports rmon mib counters
- ethernet statistics, ethernet history, alarm, even groups
- overflow interrupt supported
support auto mdi-mdix function (optional)
support link fault pass through function between p01 and p02
support far end fault function (fef pattern or oam)
built in power abnormal detection
support comprehensive led display
0.25u technology, 2.5/3.3v power
ip113s built in a 3-port switch controller, an oam engine, a fast ethernet transceiver, a phy for 100base-fx and three mii i/f. two of these mii can be configured as smii or rs232 i/f. the powerful switch engine supports flow contol, vlan, qos, port mirroring, and trunking, etc.
ip113s can be a 10/100base-tx to 100base-fx converter with an mii to connect to an external phy for back up fiber application or an external mac for web management application. ip113s forwards packets with length up to 2046 bytes in store and forward mode and modified cut through mode and it can support jumbo frame (up to 9k bytes) in pure converter mode and pass through mode to meet requirement of extra long packets.
ip113s supports remote access function and loop back test function defined in ts-1000 standard version 2 (＊). local ip113s can access the registers of remote ip113s by programming local ip113s’s registers via smi connection. ip113s implements the management function using the maintenance frame defined in ts-1000 spec.
ip113s supports smii to connect to a switch controller to build up a multiple-port fiber switch, which supports ts-1000. ip113s is a two-port 100base-fx phy with ts-1000 function in this application.
ip113s can be used as a six-pin rs232 extender, rts, cts, dtr, dsr, dc and si, when it works as a rs232 to ethernet converter. the limitation in distance of rs232 is extended to the distance of ethernet 100base-tx or 100base-fx.
＊ the ecommunication technology committee owns the copyright of ts-1000.
feature :
built in a 3-port switch
- non-blocking architecture
- pass all packets with/without crc check (optional)
- pass pause frame (optional)
- bandwidth control (32k or 512kbps x n)
- forward 2046 bytes (max.) packets in switch mode
- forward 9k jumbo packets in pass through mode
- port mirroring
- link aggregation (support recovery)
- support rs232-like interface to tp/fiber extension mode
built in 2-port fast ethernet phy
- a 10/100base-tx/100base-fx phy
- a 100base-fx phy
supports ts-1000
supports two wires serial cpu interface for management
supports rmon mib counters
- ethernet statistics, ethernet history, alarm, even groups
- overflow interrupt supported
support auto mdi-mdix function (optional)
support link fault pass through function between p01 and p02
support far end fault function (fef pattern or oam)
built in power abnormal detection
support comprehensive led display
0.25u technology, 2.5/3.3v power
